Kinetics of Phosphate Ions and Phytase Activity Production for Lactic Acid-Producing Bacteria Utilizing Milling and Whitening Stages Rice Bran as Biopolymer Substrates.

A study evaluated nine kinetic data and four kinetic parameters related to growth, production of various phytase activities (PEact), and released phosphate ion concentration ([Pi]) from five lactic acid bacteria (LAB) strains cultivated in three types of media: phytate (IP6), milling stage rice bran (MsRB), and whitening stage rice bran (WsRB). Score ranking techniques were used, combining these kinetic data and parameters to select the most suitable LAB strain for each medium across three cultivation time periods (24, 48, and 72 h). In the IP6 medium, Lacticaseibacillus casei TISTR 1500 exhibited statistically significant highest (p ≤ 0.05) normalized summation scores using a 2:1 weighting between kinetic and parameter data sets. This strain also had the statistically highest levels (p ≤ 0.05) of produced phosphate ion concentration ([Pi]) (0.55 g/L) at 72 h and produced extracellular specific phytase activity (ExSp-PEact) (0.278 U/mgprotein) at 48 h. For the MsRB and WsRB media, Lactiplantibacillus plantarum TISTR 877 performed exceptionally well after 72 h of cultivation. It produced ([Pi], ExSp-PEact) pairs of (0.53 g/L, 0.0790 U/mgprotein) in MsRB and (0.85 g/L, 0.0593 U/mgprotein) in WsRB, respectively. Overall, these findings indicate the most promising LAB strains for each medium and cultivation time based on their ability to produce phosphate ions and extracellular specific phytase activity. The selection process utilized a combination of kinetic data and parameter analysis.

Inhibitory Effects of Saponin-Rich Extracts from Pouteria cambodiana against Digestive Enzymes α-Glucosidase and Pancreatic Lipase.

Pouteria cambodiana is a perennial plant that has a wide distribution in tropical regions. It is commonly referred to as 'Nom-nang' in the northern region of Thailand. The bark of this plant has been used for the purpose of promoting lactation among breastfeeding mothers. Moreover, P. cambodiana bark has a high nutraceutical potential due to the presence of saponins, which are secondary metabolites. The purpose of this study was to determine the optimal conditions for ultrasound-assisted extraction (UAE) of saponins from the bark of P. cambodiana and to assess the in vitro inhibitory activities of saponin-rich extracts. The most effective extraction conditions involved a temperature of 50 °C and a 50% concentration level of ethanol as the solvent, which allowed the extraction of saponin at a concentration of 36.04 mg/g. Saponin-rich extracts and their hydrolysates from P. cambodiana bark were evaluated for their ability to inhibit α-glucosidase and pancreatic lipase. The IC50 values for saponin- and sapogenin-rich extracts inhibiting α-glucosidase were 0.10 and 2.98 mg/mL, respectively. Non-hydrolysed extracts also had a stronger inhibitory effect than acarbose. In the case of pancreatic lipase, only the hydrolysed extracts exhibited inhibitory effects on pancreatic lipase (IC50 of 7.60 mg/mL). Thus, P. cambodiana bark may be an applicable natural resource for preparing ingredients for functional products with inhibitory activity against α-glucosidase and pancreatic lipase. The phenolic contents, saponin contents, and antioxidant activities of the dried extract stored at a low temperature of 25 °C for 2 months showed the best stability, with more than 90% retention.

Production of Phenylacetylcarbinol via Biotransformation Using the Co-Culture of Candida tropicalis TISTR 5306 and Saccharomyces cerevisiae TISTR 5606 as the Biocatalyst.

Phenylacetylcarbinol (PAC) is a precursor for the synthesis of several pharmaceuticals, including ephedrine, pseudoephedrine, and norephedrine. PAC is commonly produced through biotransformation using microbial pyruvate decarboxylase (PDC) in the form of frozen-thawed whole cells. However, the lack of microorganisms capable of high PDC activity is the main factor in the production of PAC. In addition, researchers are also looking for ways to utilize agro-industrial residues as an inexpensive carbon source through an integrated biorefinery approach in which sugars can be utilized for bioethanol production and frozen-thawed whole cells for PAC synthesis. In the present study, Candida tropicalis, Saccharomyces cerevisiae, and the co-culture of both strains were compared for their biomass and ethanol concentrations, as well as for their volumetric and specific PDC activities when cultivated in a sugarcane bagasse (SCB) hydrolysate medium (SCBHM). The co-culture that resulted in a higher level of PAC (8.65 ± 0.08 mM) with 26.4 ± 0.9 g L-1 ethanol production was chosen for further experiments. Biomass production was scaled up to 100 L and the kinetic parameters were studied. The biomass harvested from the bioreactor was utilized as frozen-thawed whole cells for the selection of an initial pyruvate (Pyr)-to-benzaldehyde (Bz) concentration ([Pyr]/[Bz]) ratio suitable for the PAC biotransformation in a single-phase emulsion system. The initial [Pyr]/[Bz] at 100/120 mM resulted in higher PAC levels with 10.5 ± 0.2 mM when compared to 200/240 mM (8.60 ± 0.01 mM). A subsequent two-phase emulsion system with Pyr in the aqueous phase, Bz in the organic phase, and frozen-thawed whole cells of the co-culture as the biocatalyst produced a 1.46-fold higher PAC level when compared to a single-phase emulsion system. In addition, the cost analysis strategy indicated preliminary costs of USD 0.82 and 1.01/kg PAC for the single-phase and two-phase emulsion systems, respectively. The results of the present study suggested that the co-culture of C. tropicalis and S. cerevisiae can effectively produce bioethanol and PAC from SCB and would decrease the overall production cost on an industrial scale utilizing the two-phase emulsion system with the proposed multiple-pass strategy.

Bamboo Pulp Toughening Poly (Lactic Acid) Composite Using Reactive Epoxy Resin.

A novel poly (lactic acid) (PLA) composite with excellent mechanical properties, toughness, thermal stability, and water resistance was developed using a reactive melt-blending technique. PLA was melt mixed with epoxy resin (EPOXY) and bamboo pulp (PULP) to improve its reaction and mechanical properties. FTIR analysis confirmed the successful reaction of the PLA/EPOXY/PULP composites; the epoxy groups of EPOXY reacted with the -COOH groups of PLA and the -OH groups of PULP. The PLA/EPOXY/PULP5 composite showed a high tensile strength (67 MPa) and high toughness of 762 folding cycles, whereas the highest tensile strength was 77 MPa in the PLA/EPOXY5/PULP20 sample. SEM images presented a gap between the PLA and PULP; gap size decreased with the addition of EPOXY. The Tg of the PLA decreased with the EPOXY plasticizer effect, whereas the Tm did not significantly change. PULP induced crystallinity and increased Vicat softening of the PLA/PULP and PLA/EPOXY/PULP composites. The EPOXY reaction of the PLA/PULP composites improved their tensile properties, toughness, thermal stability, and water resistance.

Reactive Blending of Modified Thermoplastic Starch Chlorhexidine Gluconate and Poly(butylene succinate) Blending with Epoxy Compatibilizer.

Biodegradable starch-based polymers were developed by melt-blending modified thermoplastic starch (MTPS) with poly(butylene succinate) (PBS) blended with epoxy resin (Er). A modified thermoplastic starch blend with chlorhexidine gluconate (MTPSCh) was prepared by melt-blending cassava starch with glycerol and chlorhexidine gluconate (CHG) 1.0% wt. The Er was melt-blended with PBS (PBSE) at concentrations of 0.50%, 1.0%, 2.5%, and 5.0% (wt%/wt%). The mechanical properties, water resistance, and morphology of the MTPSCh/PBSE blends were investigated. The MTPSCh/PBSE2.5% blend showed an improvement in tensile strength (8.1 MPa) and elongation at break (86%) compared to the TPSCh/PBS blend (2.6 MPa and 53%, respectively). In addition, water contact angle measurements indicated an increase in the hydrophobicity of the MTPSCh/PBSE blends. Thermogravimetric analysis showed an improvement in thermal stability when PBS was added to the MTPSCh blends. Fourier transform infrared spectroscopy data confirmed a new reaction between the amino groups of CHG in MTPSCh and the epoxy groups of Er in PBSE, which improved the interfacial adhesion of the MTPSCh/PBSE blends. This reaction improved the mechanical properties, water resistance, morphology, and thermal stability of the TPSCh/PBSE blends.

Extraction of gymnemic acid from Gymnema inodorum (Lour.) Decne. leaves and production of dry powder extract using maltodextrin.

The aim of the present study was to maximize the extraction of gymnemic acid (GA) from Phak Chiang Da (PCD) leaves, an indigenous medicinal plant used for diabetic treatment in Northern Thailand. The goal was to overcome the low concentration of GA in the leaves, which limits its applications among a larger population and develop a process to produce GA-enriched PCD extract powder. The solvent extraction method was employed to extract GA from PCD leaves. The effect of ethanol concentration and extraction temperature were investigated to determine the optimum extraction conditions. A process was developed to produce GA-enriched PCD extract powder, and its properties were characterized. In addition, color analysis (L*, a*, and b*) was performed to evaluate the overall appearance of the PCD extract powder. Antioxidant activity assay was conducted to assess the ability of the PCD extract powder to neutralize DPPH free radicals. The results showed that the concentration of 50% (v/v) ethanol at 70 °C for 2 h resulted in a higher GA concentration of 8307 mg/kg from dried PCD leaves. During the drying process, the use of maltodextrin at a concentration of 0.5% (w/v) was found to produce PCD extract powder with the maximum GA concentration. The color analysis revealed that the PCD extract powder had a dark greenish tint mixed with yellow. The antioxidant activity assay showed that 0.1 g of PCD extract powder was able to neutralize 75.8% of DPPH free radicals. The results concluded that PCD extract powder could potentially be used as a source of nutraceuticals or as a functional food ingredient. These findings suggest the potential value of GA-rich PCD extract powder in various applications in the pharmaceutical, nutraceutical, or food industries.

Enhancement in mechanical and antimicrobial properties of epoxidized natural rubber via reactive blending with chlorhexidine gluconate.

An epoxidized natural rubber (ENR) blend with chlorhexidine gluconate (CHG) was prepared using a two-roll mill at 130 °C. CHG was added at concentrations of 0.2, 0.5, 1, 2, 5, and 10% (w/w) as an antimicrobial additive. The ENR blend with 10% (w/w) CHG showed the best tensile strength, elastic recovery, and Shore A hardness. The ENR/CHG blend exhibited a smooth fracture surface. The appearance of a new peak in the Fourier transform infrared spectrum confirmed that the amino groups of CHG reacted with the epoxy groups of ENR. The ENR with 10% CHG exhibited an inhibition zone against Staphylococcus aureus. The proposed blending improved the mechanical properties, elasticity, morphology, and antimicrobial properties of the ENR.

Antioxidant and Antimicrobial Properties and GC-MS Chemical Compositions of Makwaen Pepper (Zanthoxylum myriacanthum) Extracted Using Supercritical Carbon Dioxide.

This research aimed to optimize pressure (10-20 MPa) and temperature (45-60 °C) conditions for supercritical fluid extraction (SFE) of Makwaen pepper (Zanthoxylum myriacanthum) extract (ME) in comparison to conventional hydro-distillation extraction. Various quality parameters, including yield, total phenolic compounds, antioxidants, and antimicrobial activities of the extracts, were assessed and optimized using a central composite design. The optimal SFE conditions were found to be 20 MPa at 60 °C, which resulted in the highest yield (19%) and a total phenolic compound content of 31.54 mg GAE/mL extract. IC50 values for DPPH and ABTS assays were determined to be 26.06 and 19.90 µg/mL extract, respectively. Overall, the ME obtained through SFE exhibited significantly better physicochemical and antioxidant properties compared to ME obtained through hydro-distillation extraction. Gas chromatography-mass spectrometry (GC-MS) analysis revealed that beta-pinene was the major component in the ME obtained through SFE (23.10%), followed by d-limonene, alpha-pinene, and terpinen-4-ol at concentrations of 16.08, 7.47, and 6.34%, respectively. On the other hand, the hydro-distillation-extracted ME showed stronger antimicrobial properties than the SFE-extracted ME. These findings suggest that both SFE and hydro-distillation have the potential for extracting Makwaen pepper, depending on the intended purpose of use.

Usual intake of one-carbon metabolism nutrients in a young adult population aged 19-30 years: a cross-sectional study.

One-carbon nutrients play an important role in epigenetic mechanisms and cellular methylation reactions. Inadequate intake of these nutrients is linked to metabolic perturbations, yet the current intake levels of these nutrients have rarely been studied in Asia. This cross-sectional study surveyed the usual dietary intake of one-carbon nutrients (folate, choline and vitamins B2, B6 and B12) among Thai university students aged 19-30 years (n 246). Socioeconomic background, health information, anthropometric data and 24-h dietary recall data were collected. The long-term usual intake was estimated using the multiple-source method. The average usual intake levels for men and women were (mean ± sd) 1⋅85 ± 0⋅95 and 2⋅42 ± 8⋅7 mg/d of vitamin B2, 1⋅96 ± 1⋅0 and 2⋅49 ± 8⋅7 mg/d of vitamin B6, 6⋅20 ± 9⋅5 and 6⋅28 ± 12 µg/d of vitamin B12, 195 ± 154 and 155 ± 101 µg dietary folate equivalent/d of folate, 418 ± 191 and 337 ± 164 mg/d of choline, respectively. Effect modification by sex was observed for vitamin B2 (P-interaction = 0⋅002) and choline (P-interaction = 0⋅02), where every 1 mg increase in vitamin B2 and 100 mg increase in choline intake were associated with a 2⋅07 (P = 0⋅01) and 0⋅81 kg/m2 (P = 0⋅04) lower BMI, respectively, in men. The study results suggest that Thai young adults meet the recommended levels for vitamins B2, B6 and B12. The majority of participants had inadequate folate intake and did not achieve recommended intake levels for choline. The study was approved by the Ethics Committee at the Faculty of Medicine, Chiang Mai University. This trial was registered at www.thaiclinicaltrials.gov (TCTR20210420007).

Valorization of rice straw, sugarcane bagasse and sweet sorghum bagasse for the production of bioethanol and phenylacetylcarbinol.

Open burning of agricultural residues causes numerous complications including particulate matter pollution in the air, soil degradation, global warming and many more. Since they possess bio-conversion potential, agro-industrial residues including sugarcane bagasse (SCB), rice straw (RS), corncob (CC) and sweet sorghum bagasse (SSB) were chosen for the study. Yeast strains, Candida tropicalis, C. shehatae, Saccharomyces cerevisiae, and Kluyveromyces marxianus var. marxianus were compared for their production potential of bioethanol and phenylacetylcarbinol (PAC), an intermediate in the manufacture of crucial pharmaceuticals, namely, ephedrine, and pseudoephedrine. Among the substrates and yeasts evaluated, RS cultivated with C. tropicalis produced significantly (p ≤ 0.05) higher ethanol concentration at 15.3 g L-1 after 24 h cultivation. The product per substrate yield (Yeth/s) was 0.38 g g-1 with the volumetric productivity (Qp) of 0.64 g L-1 h-1 and fermentation efficiency of 73.6% based on a theoretical yield of 0.51 g ethanol/g glucose. C. tropicalis grown in RS medium produced 0.303 U mL-1 pyruvate decarboxylase (PDC), a key enzyme that catalyzes the production of PAC, with a specific activity of 0.400 U mg-1 protein after 24 h cultivation. This present study also compared the whole cells biomass of C. tropicalis with its partially purified PDC preparation for PAC biotransformation. The whole cells C. tropicalis PDC at 1.29 U mL-1 produced an overall concentration of 62.3 mM PAC, which was 68.4% higher when compared to partially purified enzyme preparation. The results suggest that the valorization of lignocellulosic residues into bioethanol and PAC will not only aid in mitigating the environmental challenge posed by their surroundings but also has the potential to improve the bioeconomy.

Antimicrobial thermoplastic starch reactive blend with chlorhexidine gluconate and epoxy resin.

An antimicrobial thermoplastic starch (TPS) was developed by melt-mixing TPS with chlorhexidine gluconate (CHG) and epoxy resin (Er). The tensile strength and hardness of the TPSCh blend increased with the addition of Er (TPSCh/Er), especially at 5 wt% Er (TPSCh/Er5) (19.5 MPa and 95 %, respectively). The water contact angle of TPSCh/Er was higher than those of TPS and TPSCh because of the improved interfacial tension. Fourier transform infrared and nuclear magnetic resonance analyses confirmed the reaction between the epoxy groups of Er, hydroxyl groups of starch, and amino groups of CHG. TPSCh/Er5 exhibited a significantly lower CHG release than TPSCh owing to the rearrangement of TPSCh chains via Er crosslinking. TPSCh/Er0.5 and TPSCh/Er1 showed inhibition zones against both tested bacteria (Staphylococcus aureus and Bacillus cereus), whereas TPSCh/Er2.5, TPSCh/Er5, and TPSCh/Er10 showed inhibition zones only against S. aureus. Moreover, TPSCh and TPSCh/Er0.5-2.5 exhibited inhibition zones with Saccharomyces cerevisiae.

Pretreatment and enzymatic hydrolysis optimization of lignocellulosic biomass for ethanol, xylitol, and phenylacetylcarbinol co-production using Candida magnoliae.

Cellulosic bioethanol production generally has a higher operating cost due to relatively expensive pretreatment strategies and low efficiency of enzymatic hydrolysis. The production of other high-value chemicals such as xylitol and phenylacetylcarbinol (PAC) is, thus, necessary to offset the cost and promote economic viability. The optimal conditions of diluted sulfuric acid pretreatment under boiling water at 95°C and subsequent enzymatic hydrolysis steps for sugarcane bagasse (SCB), rice straw (RS), and corn cob (CC) were optimized using the response surface methodology via a central composite design to simplify the process on the large-scale production. The optimal pretreatment conditions (diluted sulfuric acid concentration (% w/v), treatment time (min)) for SCB (3.36, 113), RS (3.77, 109), and CC (3.89, 112) and the optimal enzymatic hydrolysis conditions (pretreated solid concentration (% w/v), hydrolysis time (h)) for SCB (12.1, 93), RS (10.9, 61), and CC (12.0, 90) were achieved. CC xylose-rich and CC glucose-rich hydrolysates obtained from the respective optimal condition of pretreatment and enzymatic hydrolysis steps were used for xylitol and ethanol production. The statistically significant highest (p ≤ 0.05) xylitol and ethanol yields were 65% ± 1% and 86% ± 2% using Candida magnoliae TISTR 5664. C. magnoliae could statistically significantly degrade (p ≤ 0.05) the inhibitors previously formed during the pretreatment step, including up to 97% w/w hydroxymethylfurfural, 76% w/w furfural, and completely degraded acetic acid during the xylitol production. This study was the first report using the mixed whole cells harvested from xylitol and ethanol production as a biocatalyst in PAC biotransformation under a two-phase emulsion system (vegetable oil/1 M phosphate (Pi) buffer). PAC concentration could be improved by 2-fold compared to a single-phase emulsion system using only 1 M Pi buffer.

Sparking Nano-Metals on a Surface of Polyethylene Terephthalate and Its Application: Anti-Coronavirus and Anti-Fogging Properties.

The nano-metal-treated PET films with anti-virus and anti-fogging ability were developed using sparking nano-metal particles of Ag, Zn, and Ti wires on polyethylene terephthalate (PET) films. Ag nanoparticles were detected on the PET surface, while a continuous aggregate morphology was observed with Zn and Ti sparking. The color of the Ag-PET films changed to brown with increasing repeat sparking times, but not with the Zn-PET and Ti-PET films. The water contact angle of the nano-metal-treated PET films decreased with increasing repeat sparking times. The RT-PCR anti-virus test confirmed the high anti-virus efficiency of the nano-metal-treated PET films due to the fine particle distribution, high polarity, and binding of the nano-metal ions to the coronavirus, which was destroyed by heat after UV irradiation. A highly transparent, anti-fogging, and anti-virus face shield was prepared using the Zn-PET film. Sparking was an effective technique to prepare the alternative anti-virus and anti-fogging films for medical biomaterial applications because of their low cost, convenience, and fast processing.

Cricket protein conjugated with different degrees of polymerization saccharides by Maillard reaction as a novel functional ingredient.

This study investigated the effects of different saccharides (inulin and fructooligosaccharides (FOS)), pH (8-10) and thermal treatment time (6-24 h) at 70 °C on the structural, functional properties and antioxidant activities of conjugated cricket protein (CCPs) by wet heating Maillard reaction (MR). Results suggested that the browning intensity, color development and degree of glycation were significantly increased (p < 0.05) under increasing thermal treatment with FOS. SDS-PAGE and FTIR confirmed the formation of a higher molecular weight of CCPs. Water solubility, oil holding capacity, emulsifying properties, and antioxidant properties of CCPs were all superior to the unconjugated products. However, the over-conditioning (treatment time > 6 h, pH > 9) in MR could contribute to a significant decrease (p < 0.05) of CCPs functional properties. The results suggested that the conjugation of cricket protein isolate (CPI) with MR is the most promising way to improve cricket protein properties for food industry applications.

Optimization of Ultrasonic-Assisted Bioactive Compound Extraction from Green Soybean (Glycine max L.) and the Effect of Drying Methods and Storage Conditions on Procyanidin Extract.

Green soybean (Glycine max L.) seeds (GSS) are rich in various antioxidants and phytonutrients that are linked to various health benefits. Ultrasound-assisted extraction (UAE) technology was used for extracting the effective components from GSS. A response surface method (RSM) was used to examine the influence of liquid-to-solid ratio and extraction temperature on the bioactive compounds and antioxidant characteristics. The optimal conditions were a liquid-to-solid ratio of 25:1 and a UAE temperature of 40 °C. The observed values coincided well with the predicted values under optimal conditions. Additionally, the effects of drying methods on the procyanidins and antioxidant activities of GSS extract were evaluated. The spray-dried GSS extract contained the highest levels of procyanidins (21.4 ± 0.37 mg PC/g), DPPH (199 ± 0.85 µM Trolox eq/g), and FRAP (243 ± 0.26 µM Trolox eq/g). Spray drying could be the most time- and energy-efficient technique for drying the GSS extract. The present study also assessed the effects of storage temperature and time on procyanidins and antioxidant activities in GSS extract powder. Procyanidins were found to degrade more rapidly at 45 °C than at 25 °C and 35 °C. Storage under 25 °C was appropriate for maintaining the procyanidin contents, DPPH, and FRAP activities in the GSS extract powder. This study contributed to the body of knowledge by explaining the preparation of procyanidin extract powder from GSS, which might be employed as a low-cost supply of nutraceutical compounds for the functional food industry and pharmaceutical sector.

Mass Spectrometry-Based Metabolomics of Phytocannabinoids from Non-Cannabis Plant Origins.

Phytocannabinoids are isoprenylated resorcinyl polyketides produced mostly in glandular trichomes of Cannabis sativa L. These discoveries led to the identification of cannabinoid receptors, which modulate psychotropic and pharmacological reactions and are found primarily in the human central nervous system. As a result of the biogenetic process, aliphatic ketide phytocannabinoids are exclusively found in the cannabis species and have a limited natural distribution, whereas phenethyl-type phytocannabinoids are present in higher plants, liverworts, and fungi. The development of cannabinomics has uncovered evidence of new sources containing various phytocannabinoid derivatives. Phytocannabinoids have been isolated as artifacts from their carboxylated forms (pre-cannabinoids or acidic cannabinoids) from plant sources. In this review, the overview of the phytocannabinoid biosynthesis is presented. Different non-cannabis plant sources are described either from those belonging to the angiosperm species and bryophytes, together with their metabolomic structures. Lastly, we discuss the legal framework for the ingestion of these biological materials which currently receive the attention as a legal high.

Mango Pectic Oligosaccharides: A Novel Prebiotic for Functional Food.

Prebiotics are functional food ingredients that assist probiotic growth and render many other health benefits. Mango peel is the biomass of the processing industry and has recently been value-added as a dietary fiber pectin. Besides its general use as a food additive, mango peel pectin (MPP) is partially hydrolyzed by pectinase to obtain pectic oligosaccharides (POSs) that have recently gained attention as novel prebiotic products and in medical research. This review describes probiotic candidates responsible for the digestion of pectin derivatives and the advantages of POSs as functional additives and their current best retrieval options. Mango pectic oligosaccharide (MPOS) recovery from low methoxyl MPP from mango with prebiotic performance both in vivo and in vitro environments is discussed. Current research gaps and potential developments in the field are also explored. The overall worthiness of this article is the potential use of the cheap-green food processing bioresource for high-value components.

Modified Poly(Lactic Acid) Epoxy Resin Using Chitosan for Reactive Blending with Epoxidized Natural Rubber: Analysis of Annealing Time.

Poly(lactic acid) was melt-blended with epoxy resin without hardener and chitosan (CTS) to prepare modified PLA (PLAEC). Epoxy resin 5% and CTS 1-20% (wt/wt) were incorporated into PLA during melt mixing. PLAEC was melt-blended with an epoxidized natural rubber (ENR) 80/20 wt. The PLAEC CTS 1% blended with ENR (PLAEC1/ENR) showed a high tensile strength (30 MPa) and elongation at break (7%). The annealing process at 80 °C for 0-15 min maintained a tensile strength of approximately 30 MPa. SEM images of the PLAE/ENR blend showed phase inversion from co-continuous to ENR particle dispersion in the PLA matrix with the addition of CTS, whereas the annealing time reduced the hole sizes of the extracted ENR phase due to the shrinkage of PLA by crystallization. Thermal properties were observed by DSC and a Vicat softening test. The annealing process increased the crystallinity and Vicat softening temperature of the PLAEC1/ENR blend. Reactions of -COOH/epoxy groups and epoxy/-NH2 groups occurred during PLAE and PLAEC preparation, respectively. FTIR confirmed the reaction between the -NH2 groups of CTS in PLAEC and the epoxy groups of ENR. This reaction increased the mechanical properties, while the annealing process improved the morphology and thermal properties of the blend.

Ultrasonic Extraction of Bioactive Compounds from Green Soybean Pods and Application in Green Soybean Milk Antioxidants Fortification.

Green soybean (Glycine max L.) pods (GSP) are agro-industrial waste from the production of frozen green soybean and milk. These pods contain natural antioxidants and various bioactive compounds that are still underutilized. Polyphenols and flavonoids in GSP were extracted by ultrasound technique and used in the antioxidant fortification of green soybean milk. The ultrasound extraction that yielded the highest total polyphenol content and antioxidant activities was 50% amplitude for 10 min. Response surface methodology was applied to analyze an optimum ultrasonic-assisted extraction (UAE) condition of these variables. The highest desirability was found to be 50% amplitude with an extraction time of 10.5 min. Under these conditions, the experimental total phenolic content, total flavonoid content, and antioxidant activity were well matched with the predicted values (R2 > 0.70). Fortification of the GSP extracts (1-3% v/v) in green soybean milk resulted in higher levels of bioactive compounds and antioxidant activity in a dose-dependent manner. Procyanidins were found to be the main polyphenols in dried GSP crude extracts, which were present at a concentration of 0.72 ± 0.01 mg/100 g. The addition of GSP extracts obtained by using an ultrasound technique to green soybean milk increased its bioactive compound content, especially procyanidins, as well as its antioxidant activity.

Synergistics of Carboxymethyl Chitosan and Mangosteen Extract as Enhancing Moisturizing, Antioxidant, Antibacterial, and Deodorizing Properties in Emulsion Cream.

Carboxymethyl chitosan (CMCH) from native chitosan of high molecular weight (H, 310-375 kDa) was synthesized for improving water solubility. The water solubility of high-molecular-weight carboxymethyl chitosan (H-CMCH) was higher than that of native chitosan by 89%. The application of H-CMCH as enhancing the moisturizer in mangosteen extract deodorant cream was evaluated. Different concentrations of H-CMCH (0.5-2.5%) were investigated in physicochemical characteristics of creams, including appearance, phase separation, pH, and viscosity, by an accelerated stability test. The different degrees of skin moisturizing (DM) on pig skin after applying H-CMCH solution, compared with untreated skin, water, and propylene glycol for 15 and 30 min using a Corneometer®, were investigated. The results showed that the 0.5% H-CMCH provided the best DM after applying the solution on pig skin for 30 min. Trans-2-nonenal, as an unsatisfied odor component, was also evaluated against components of the mangosteen extract deodorant cream, which were compared to the standard, epigallocatechin gallate (EGCG). In addition, DPPH and ABTS radical scavenging activity, ferric reducing antioxidant power (FRAP), and antibacterial activities were examined for the mangosteen extract deodorant cream using 0.5% H-CMCH. Results indicated that the mangosteen extract synergized with H-CMCH, which had a good potential as an effective skin moisturizing agent enhancer, deodorizing activity on trans-2-nonenal odor, antioxidant properties, and antibacterial properties.